• Your shopping cart is empty!

  • Resin - Woodcast 30 1.6kg

A 1kg

B 600gr

Economy Shallow Casting Epoxy Resin
Manufacturer's Brand Name: WoodCast 30
 
Overview
  • Clear but not UV stabilised so will discolour in all environments, especially quickly outdoors.
  • The cured resin is glossy, fairly hard and suitable for temperatures up to 65degC.
  • A high flow (thin) resin for layers up to 10mm.
  • Should always be pigmented so that discolouration in not noticeable.  
  • Typical Applications: Resin Art on flat surfaces and casting into shallow moulds. An economical resin to practice with.
Mixing ratio is 100 Resin : 60 Hardener by weight. This resin should not be measured by volume.
 
Typical Applications
  • To hide discolouration this resin is usually coloured with pigments in all applications.
  • Usually used for shallow casting up to10mm deep with multiple layers added to get thicker final resin layer.
  • Can be applied as a coating using a brush, roller or squeegee (be aware of the potential for a long curing time of thin layers).
  • Can be used for thin layer resin art on flat surfaces such as tiles, glass, wood etc.
  • Also used as an economical practice resin.

General points for all resin work

Resins are not simple to work with. Start small and get to know your products and the correct methods.
Preparation and mixing are crucial for any resin project to be successful. Read and follow all instructions carefully. Only mix the quantity that you will use immediately as resins cannot be stored after mixing. The heat generated in a container of un-poured resin or in resin that is applied too thick can reach dangerously high levels. The maximum layer thickness indicated does not apply in all conditions and must be reduced in hot weather and when casting into closed systems with little surface area for heat loss. 
 
You need to take health precautions when working with resins so read safety and health instructions carefully. Avoid breathing fumes of this product. Use in a well ventilated area at minimum but an approved respirator is recommended. Avoid skin contact and wear safety glasses, long sleeves and rubber gloves to minimise skin contact. This product is an irritant to the eyes, skin and mucous membranes. 
Keep out of reach of children.

https://youtu.be/Q34phvaPdRM

Resin - Woodcast 30 1.6kg

  • Product Code:a017
  • Availability:In Stock

  • N$832.00